770M/Series3 ATC TTS Files

770M/Series3

DIY/Build your own ATC mechanicals for a fraction of the cost of an OEM ATC. These mechanical drawings are for a direct bolt on mechanical system similar in function to the OEM ATC. These CAD drawings allow you to machine the parts and assemble yourself thus saving thousands of dollars.

Files include 2 ATC design options, so choose your build from either a Belt or Direct gear drive for tool fork carrousel rotation. Both designs have been built and are on operational machines.

(File: Direct Drive) file contain 2 ATC designs; the original direct drive design which is in current use. Then I applied design additions (File: Air Blast) that has untested changes applied incorporating a nice addition, you choose. Feedback is welcome!!!

How it works

ATC is Pneumatically driven in/out with an air Cylinder and proximity sensor referenced at tool load position.

Tool carrousel/tray rotation is Stepper motor driven as well as proximity sensor referenced.

Enclosure door is opened/closed by mechanical linkage during tool load sequence.

Main model file is featured in a 12 tool format. You can easily change the model to fit 8 and 10 tool (disc designs included) For Path/pilot.

This 3d model file for instant Download is in Fusion360 (f3z) format. Also Included (f3d) Sheet metal format for enclosure parts. If you require other file type, please contact us.

Upon completing purchase Cad files will be available as an instant download so you can get started right away.

• Note: Mechanical Cad Files only NO ELECTRONICS or associated designs.
• Note: Pneumatic Power Drawbar required and not covered within the files.

(also seen in our DIY build videos link to EP1-12 below)

Join Our DIY for Tormach Facebook Page

https://www.facebook.com/groups/519747757633717/